Home electrical safety: the protection you don’t notice until it matters
Surge protection, GFCI and AFCI, grounding and bonding, and smoke and carbon-monoxide detectors — the quiet systems standing between an ordinary day and a very bad one. We install them right, to code — and leave you knowing exactly what’s protected and what isn’t.
Safety work we do
The dangers that don’t trip a breaker
The surge you don’t feel
A grid switch or a nearby strike sends a spike down the line that quietly cooks the electronics in your walls — or starts a fire — without ever flipping a breaker.
Water plus electricity
Kitchens, baths, garages, and outdoors are where shocks happen. GFCI protection cuts power in a fraction of a second; without it, the path to ground can be you.
The alarm that didn’t
A detector older than ten years, or one that catches smoke but misses carbon monoxide, is an alarm you think you have but don’t.
Whole-home surge protection
Most people picture surges as lightning. Most surges aren’t — they’re the small, daily spikes from the grid switching, big appliances cycling, and utility events, each one shaving life off your electronics. A whole-home surge protector at the panel is the first line; layered point-of-use protection guards the sensitive gear. One strike, or ten thousand small ones, shouldn’t take your home’s electronics with it.
GFCI and AFCI — two different jobs
| GFCI | AFCI | |
|---|---|---|
| Guards against | Shock — cuts power when current strays to ground | Fire — trips on the arcing of damaged or loose wiring |
| Where it lives | Kitchens, baths, garages, outdoors, laundry | Most living-area circuits under modern code |
| You notice it | When it saves you from a shock | When it catches a fault before it becomes a fire |
Older homes are often missing both. We bring the right protection to the right circuits, to current code.
Grounding and bonding — the foundation
Grounding gives stray current a safe path away from you; bonding ties the metal parts of your electrical system together so they can’t sit at different voltages. Done right, it’s the invisible backbone that makes every other protection work. Done poorly — or missing, as in many older Austin homes — it quietly undermines all of them. We verify it and correct it.
Smoke and carbon-monoxide detectors
This is the protection people are most sure they have and most often don’t. Two facts surprise nearly everyone:
- Detectors expire. Smoke alarms should be replaced about every 10 years, and CO alarms every 5 to 10 — even if they still chirp when you test them. The sensor wears out long before the unit looks old.
- Smoke and carbon monoxide are different threats. Carbon monoxide is invisible and odorless, and a smoke alarm won’t catch it. Any home with a gas appliance, a fireplace, or an attached garage needs CO detection, not just smoke.
- Interconnection matters. When alarms are interconnected, one sensing danger sounds them all — so you hear it in the back bedroom while the threat is still in the garage.
- Placement matters. Code calls for alarms in every bedroom, outside each sleeping area, and on every level. We place and mount them correctly, hardwired with battery backup where required.
We install, replace, and interconnect smoke and CO detectors — including combination units — so the alarm you count on is one that will actually sound. With every panel upgrade we update up to six detectors at no added cost.
Code-compliance corrections
Buying, selling, remodeling, or just want to know where you stand? We evaluate the system against current code and correct what’s deficient — the kind of issues that show up on an inspection report, and the ones that don’t. Real corrections that make the home safer, not pass/fail paperwork.
Layered protection, head to toe
Whole-home surge
Panel-level protection plus point-of-use guards for the electronics worth protecting.
GFCI protection
Shock protection where water and electricity meet — kitchens, baths, garages, outdoors.
AFCI protection
Arc-fault breakers that catch the damaged or loose wiring that starts fires.
Grounding & bonding
The verified, corrected foundation every other protection depends on.
Smoke & CO detectors
Installed, replaced, and interconnected — including combo units — placed to code.
Code corrections
Real fixes for code-deficient wiring, not pass/fail paperwork.
The things we stand for.
The people we send into your home
We believe our people are the friendliest and best trained in the business, and we put them first — because happy employees make happy customers.You’ll feel it the moment they arrive.
The right materials, every time
We believe low-quality equipment or poor workmanship are NEVER a good value.What goes into your walls today is still working in twenty years.
We spend the time to do it right
We believe in taking the time to learn exactly what you want, then finishing to the highest standard in the industry.Right the first time — and made right if it ever isn’t.
A clear picture, then real protection
You’ll know exactly what’s protected and what isn’t.
We assess what’s there
Surge, GFCI/AFCI, grounding, and the age and coverage of your smoke and CO alarms — the whole picture.
You get a plain-language plan
What’s solid, what’s a genuine risk, and what it costs to close the gaps — explained, not just listed.
We install to code
Protection added and corrected to NEC and local code, tested, and documented.
You know you’re covered
We show you what’s protecting what, and how to test it going forward.
Want to know where your home actually stands? Book a safety assessment.
Why homeowners trust us with their home.
BBB A+ Rated
Accredited and in good standing with the Better Business Bureau.
Angi Award Winner
Recognized for service quality every year, 2018–2025.
Manufacturer-Certified
Tesla, SPAN, and the panel makers we trust certify who installs their equipment — and they don’t certify lightly.
Five-Star Rated, Over and Over
Five stars on Google, Yelp, and Angi — earned the hard way, one job at a time.
Warrantied & Honored
We honor our warranties — no loophole-hunting, no nonsense exclusions. If we install it, we own it.
Permits & Inspections Handled
Fully licensed and insured. When a job needs permits, we manage all of it — nothing for you to chase.
Austin homeowners, in their words
DC upgraded our electrical panel and the service from start to finish was excellent — on time, hard-working, and everything explained before they left.
We got multiple bids and the team at DC were the easy choice. They walked us through what was a genuine risk and what wasn’t, took care of everything thoroughly, and there were no surprises.
Backed in writing
Our safety work is backed by a workmanship warranty, and the equipment we install carries its manufacturer’s warranty. The protections you can’t see should be the ones you can count on.
Real jobs, real homes.
A growing library of completed work across Greater Austin — and the badges we've earned along the way.
Answers before you book
How often should smoke and carbon-monoxide detectors be replaced?
Do I really need carbon-monoxide detectors if I have smoke alarms?
What’s the difference between GFCI and AFCI?
Do I need whole-home surge protection if I have power strips?
Why does grounding and bonding matter so much?
Can you tell me whether my home’s wiring is up to code?
Plain-English answers to common questions
Tell us what you need.
Tell us what you need and our office will get back to you to set a time. A licensed electrician handles the visit.
Request your appointment.
Our office calls to set a time that works. A licensed electrician then handles the visit — and walks you through clear options and pricing.
- A licensed electrician on site
- Clear options and pricing, explained
- Workmanship warranty, in writing
Got it — we'll be in touch.
Our office will call you to schedule your appointment.
Office
3906 N Lamar Blvd, Suite 204 AB
Austin, TX 78756
Phone
Hours
Open 24/7 · Weekend service for existing customers
Service Area
Austin is home — the surrounding towns are family. Serving all of Greater Austin.